CS Series

clipper

Product Description

• UL listed. Outdoor Rated (NEMA 4) enclosure.
• Reclosure: Smart software that automatically self-checks unit and resumes
charging after minor fault.
• Charge Circuit Interruption Device: Ground Fault protection with fully automatic
self-check feature that eliminates the need for monthly testing by user.
• Service Ground Monitor: Constantly checking for presence of proper safety ground.
• External Control Input: Allows external control from smart meter (AMI), billing or
load management device.
• Cold Load Pickup: Time-delayed and randomized to allow re-energizing of unit
following power outages.

Additional Information
Service Entrance

208V to 240V – 30 to 100 Amps, single phase, 2 wire w/ground

Construction

17” W x 14” H x 6” D (430mm W x 360mm H x 150mm D) NEMA 4 Construction

Operating Temperatures

-22 F to 122 F (-30 C to 50 C)

Available Options

Innovative low cost BILLING SYSTEM SMART GRID Enabled EVSE – tie directly into your AMI Meter

Codes, Standards And Recomended Practices

UL 2202 Charging Station Safety UL 2231 Personal Protection Device (i.e., CCID hardware) UL 1998 Standard for Safety Related Software UL 991 Standard for Tests for Safety-Related Controls Employing Solid-State Devices NEC 625 Electric Vehicle Charge System SAE-J1772 Electric Vehicle Conductive Charge Coupler The CS line offers multiple currents that enable you to charge at the highest rate possible, so that vehicles are always fully charged.


©2013 EV Tech, Inc. All Rights Reserved. Terms & Conditions | Privacy Policy Powered by